Nelson N800iTM - Page 11

Tucker GmbH, Mail / Post: Max-Eyth-Str.1, 35394 Gießen, Germany
Stud welding unit N800i
As of 24.08.2021
Manual part number: BE 1227
7
1.4301
1.4303
1.4401
1.4529
1.4541
1.4571
Suitable with
restriction
b
Well
suitable for any
application
a e
Suitable with
restrictions
b
Well
suitable for
any
application
a
Not suitable
for welding
EN AW-AIMg3
EN AW-AIMg5
Not suitable
for welding
Not suitable
for welding
Not
suitable
for
welding
Suitable
with
restrictions
b
Group 1:
Steel with a specified minimum yielding point ReH
≤460 N/ mm²
Group 2.1
Thermo-mechanically rolled fine-grain structural
steel and steel casting of a specified minimum
yielding point of 360 N/ mm² < ReH ≤460 N/mm²
Group 2.2:
Thermo-mechanically rolled fine-grain structural steel
and steel casting of a specified minimum yielding
point ReH > 460 N/mm²
Group 3:
Hardened and tempered and precipitation-hardened
steel, but no rustproof steel, of a specified minimum
yielding point ReH > 360 N/mm²
1. ISO/TR 15608: Welding Guidance on Grouping Metallic Materials
(2000 06)
Group 4:
Low vanadium-alloyed Cr-Mo-(Ni) steel with Mo ≤
0.7% and V ≤ 0,1%
Group 5:
Vanadium-free Cr-Mo steel with C ≤ 0,35%)
Group 6:
Highly vanadium-alloyed Cr-Mo-(Ni) steel
Group 8:
Austenitic steel
Group 10:
Austenitic ferritic rustproof steel (duplex)
Group 21:
Pure aluminum ≤ 1% impurities or alloy contents