Tucker GmbH, Mail / Post: Max-Eyth-Str.1, 35394 Gießen, Germany
To protect against direct and indirect contact the welding unit is equip-
ped with the
following protective measures:
Protection
type IP 23 S: Protection against penetration by foreign bodies (Ø
≥12mm). Protection against splash water, inclined up to
60° to the perpendicular.
Protection
class I: Unit with basic insulation and connection of all exposed
conductive
parts to the protective conductor.
WARNING!
During wet weather (e.g. rain), with the N800i should not be
welded
outdoors!
Wet equipment must dry out before use. Operators must always
use dry
insulation between themselves and the welding equipment.
To Next Page
Loading...
