Tucker GmbH, Mail / Post: Max-Eyth-Str.1, 35394 Gießen, Germany
39
• When received directly from the factory, 230/460V machines are
internally
connected for 460VAC. 575V machines are internally
connected for 575V from
the factory.
• Open the access panel on the rear of the machine.
POWER CORD CONNECTION
• A power cord is provided and wired into the machine. Follow
the power cord
connection instructions.
TROUBLESHOOTING WITH COVER OFF
• Do not remove plexiglass. Unlike other welders, N800i heat-
sinks have HIGH
VOLTAGE.
To Next Page
Loading...
