To Next Page

To Previous Page

Tables

Table 1 – Environmental Specifications

Table 2 – Performance Specifications

Table 3 – Commercial and Industrial MACH 10

Meter Weight Specifications

Table 4 – Commercial and Industrial MACH 10

Meter Dimensions

Table 5 – Additional Specifications

Table 6 – Recommended Tools and Materials for Meter Installation

Table 7 – Recommended Tools for Unitized Measuring Element Replacement

Table 8 – Maximum Flow Rates

Table 9 – Color Codes for Wires

Table 10 – MACH 10

Icons and Displays

Table 11 – Consumption and Units of Measure – Commercial and Industrial

Table 12 – Full Flow Testing

Table 13 – Intermediate Flow Testing

Table 14 – Low Flow Testing

Table 15 – Meter is Under Registering

Table 16 – Meter is Over Registering

Table 17 – Meter Stops Registering During a Test

Table 18 – Meter Does Not Register Water When Running a Test

Table 19 – Meter Does Not Register on Automated Test Bench

Table 20 – LCD Display Does Not Illuminate

Table 21 – MIU or LCD Display Reports Errors

Table 22 – MACH 10

R900i™ Meter Dimensions – Commercial and Industrial

Table 23 – Transmitter Specifications

Table 24 – Functional Specifications

Table 25 – Eighth Digit Resolution by Meter Size – Commercial and Industrial

Table 26 – MACH 10

)R900i™ Flags (digits)

Table 27 – MACH 10

)R900i™ Flags (minutes)

Commercial and Industrial MACH 10

Ultrasonic Meter Installation and Maintenance Guide xi

Neptune MACH 10 User Manual

Questions and Answers: