Commercial and lndustrial MACH 10
®
Ultrasonic Meter Installation and Maintenance Guide 1
Chapter 1: Product Description
This chapter provides a general description of the 3-inch to 6-inch Neptune
®
Commercial
and Industrial MACH 10
®
Ultrasonic Meter (C&I MACH 10).
Introduction
Ultrasonic technology:
l Contains no moving parts.
l Provides long-term accuracy.
l Reduces measurement errors due to sand, suspended particles, and pressure
fluctuations.
The MACH 10 solid state meter uses ultrasonic transit-time technology and solid
state electronics. The C&I meter register is contained in a compact, totally encap-
sulated, weatherproof, and ultraviolet (UV) resistant housing for commercial and
industrial applications.
The C&I MACH 10
®
ultrasonic water meter features solid state ultrasonic technology
including a factory-calibrated, replaceable unitized measuring element (UME) with no
degradation of accuracy over time.
Combined with a corrosion-resistant, lead free, high-copper alloy maincase, the
C&I MACH 10 is built to withstand any demanding service condition and deliver sustained
accuracy over the life of the meter.
The C&I MACH 10 provides a Neptune E-CoderPLUS output signal to Neptune R900
®
and
other Automatic (or automated) Meter Reading (AMR) / Advanced Metering Infrastructure
(AMI)endpoints.
The meter's electronics and battery are fully potted to eliminate the intrusion of moisture,
dirt, or other contaminants. It is suitable for installation in all environments including meter
pits subject to continuous flooding.
To Next Page
Loading...
Need help?
General
