Saturn B – Chapter 2. Operation2.18
Selecting Default LES
General
The default Land Earth Station for an Ocean Region is automatically
used if the user does not select a specific one (see "Call from Dis-
play Handset: Call through Selected LES" in chapter 1. Getting
Started).
The default LES for each Ocean Region is selectable. Available LESs
and their Code Numbers are listed in appendix A.
Default LES
1Read out the default Land Earth
Station, e.g Indian Ocean Region (3):
(You can also scroll up/down
to set the default LES for
another Ocean Region.)
New Default LES
2
Key in LES Code, e.g. no.4 (Eik):
3Enter e.g. LES 004 as default:
and revert:
Note!
Saturn B must be synchronized to the satellite when selecting Default
LES (circular indicator appears in the display). Default LESs can be
programmed for all Ocean Regions as long as the indicator is on.
If the message ILLEGAL CHOICE appears, the entered
LES does not exist in the specified Ocean Region.
The default LES function may also be fetched using the DEFAULT
LES function no. 50. This entry requires that the terminal is set in
"Operator’s Level".
ON
IOR
LES 012
3
ENTER
ESC
LES
PTT
4
JKL
ON
DEFAULT LES
4
3
ON
IOR
LES 04
3
ENTER
Ocean Region
designation
Land Earth
Station code
Ocean Region
ref. no.
Selecting Default LES
To Next Page
Loading...
