Ness D16 User Manual

NESS D16 (V4.5) CONTROL PANEL - USER MANUAL
11
OPERATION
Monitor mode allows you to Arm selected zones
while others are ignored. Typically, perimeter
zones (doors and windows) can be monitored
while you are at home.
Your installer must program which zones will
be active in Monitor mode.
The panel must be fully Disarmed before
Arming in Monitor Mode.
If an alarm occurs while in Monitor mode,
entering
[User Code]
will silence the alarm.
This will also Disarm the panel, so remember to
enter monitor again if needed.
Using the optional Radio Keys you can enter
Monitor Mode by pressing the OFF button twice
within 4 seconds or by pressing the ON button
twice within 5 seconds. (Your installer must
enable Radio Key Monitor Arming for this to
work).
MONITOR MODE
or...
Press...
• Only the zones which have been programmed
by your installer as Monitor zones will be Armed.
The MONITOR icon will turn on.
[User Code]
Provided for Download by www.bendigosecurity.com.au

Ness D16 Specifications

General

Brand	Ness
Model	D16
Category	Control Panel
Language	English