NESS D16 (V4.5) CONTROL PANEL - USER MANUAL
12
OPERATION - EMERGENCY FUNCTIONS
The keypad PANIC function may have been
programmed to be either AUDIBLE - activates
siren or buzzers, or SILENT - If your system is
monitored by a Central Station, sends a PANIC
report by dialler. (If PANIC reports have been
enabled by your installer).
PANIC cannot be used while the panel is in
Program, Memory or Exclude mode.
Note: Your installer may have installed a
separate PANIC button. To activate the panic
alarm simply press that button.
KEYPAD PANIC
Press...
(If Keypad Panic Shortcut has been enabled by your installer.)
Both keys together.
or...
or...
[User Code]
KEYPAD DURESS
Press...
(If Keypad Panic Shortcut has been enabled by your installer.)
Both keys together.
or...
or...
[User Code]
The DURESS alarm can be used to send a
silent alarm to the Central Station that you are
being forced to Disarm the panel against your
will. That is; you are disarming under “duress.”
To Disarm and send a DURESS alarm, prefix
your User Code with one of the digits 5, 6, 8 or
9 when Disarming.
* DURESS IS NORMALLY NOT ENABLED. TO ENABLE
THE DURESS FUNCTION, CONSULT YOUR INSTALLER
* DURESS ALARMS CAN ONLY USED BY SYSTEMS
WHICH ARE MONITORED BY A CENTRAL STATION.
* THE DURESS ALARM CAN BE PROGRAMMED TO
SOUND THE INTERNAL SIREN (RESET OUTPUT). THIS
OPTION IS OFF BY DEFAULT.
To Next Page
Loading...
Need help?
General
