NESS D16 (V4.5) CONTROL PANEL - USER MANUAL
19
PROGRAMMING
OPTION OPTION No PROGRAMMEDRANGE
FACTORY
DEFAULT
User Code 1 (Master Code) P11E 123 3 to 6 digits
3 to 6 digits
3 to 6 digits
3 to 6 digits
3 to 6 digits
3 to 6 digits
3 to 6 digits
3 to 6 digits
3 to 6 digits
3 to 6 digits
3 to 6 digits
3 to 6 digits
3 to 6 digits
3 to 6 digits
3 to 6 digits
1 to 99 sec
10 to 990 sec
1 to 99 sec
Up to 15 digits
User Code 2 P12E
User Code 3 P13E
User Code 4 P14E
User Code 5 P15E
User Code 6 P16E
User Code 7 P17E
User Code 8 P18E
User Code 9 P19E
User Code 10 P20E
User Code 11 P21E
User Code 12 P22E
User Code 13 P23E
User Code 14 P24E
User Code 15 P25E
Entry Delay 1
Entry Delay 2
Exit Delay
Follow Me Telephone No.
P26E
P27E
P28E
P00E
20 seconds
60 seconds
60 seconds
NOTE: The Entry Delay 2 timer programs in 10 second intervals.
Example: if a value of 6 is programmed, the time is 60 seconds.
PROGRAMMING OPTIONS TABLE
To Next Page
Loading...
Need help?
General
