Net2Edge Liberator 44 Series - Log in to the LIB-4 Xxx Via Hyperterminal (HT)

LIB-4400/4424 Installation Guide
| MANUAL Page 36 of 65
Log In to the LIB-4xxx via HyperTerminal (HT)
Open the HyperTerminal (HT) program.
Create a new connection by selecting File > New Connection.
Enter a name for the session, choose an icon, and click the OK button.
At the Connect To dropdown select “COM7” and click the OK button.
At the COM 7 Properties > Port Settings tab, select:
Bits per second: 115,200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
Click the OK button.
Press the Enter key twice.
At the Username prompt enter admin and press the Enter key. The TN CLI Welcome screen
displays.