3. Web Interface and CLI
When the previous steps are successfully completed, you can continue with the LIB-4xxx web interface
menu system and/or the CLI (Command Line Interface. Refer to the related manual below for additional
information:
LIB-4xxx
Web Interface User Guide
LIB-4xxx
Command Line Interface (CLI) Reference
Web Interface Menu System
The LIB-4xxx web interface is available from a PC connected to a network port or management port.
Ensure that the PC and the LIB-4xxx are on the same subnet, start the PC’s browser, point the browser
at the switch’s IP address (default is 192.168.0.1), enter login credentials (default username “admin” -
no quotes), default password blank (i.e., empty), and the LIB-4xxx startup screen shown below displays.
Figure 13: Default (Startup) Web GUI Screen
The default (startup) screen above is at the Monitor > Ports > State menu path. Help screens are
available via the question mark button in the top right corner.
To Next Page
Loading...