Net2Edge Liberator 44 Series - Connector Types; Cable Types; RJ-45 to DB-9 Cisco Blue Serial Cable; Figure 16: Connector Types

LIB-4400/4424 Installation Guide
| MANUAL Page 48 of 65
Connector Types
The SFP connector type indicates the external optical or electrical cable connector provided as the
interface. The information below is from SFF-8472 Rev 11.0. For additional information see the latest
SFF-8472 Specification at ftp://ftp.seagate.com/sff/SFF-8472.PDF.
Table 6: Connector Descriptions
Value
Description of connector
00h
Unknown or unspecified
01h
SC
02h
Fibre Channel Style 1 copper connector
03h
Fibre Channel Style 2 copper connector
04h
BNC/TNC
05h
Fibre Channel coaxial headers
06h
FiberJack
07h
LC
08h
MT-RJ
09h
MU
0Ah
SG
0Bh
Optical pigtail
0Ch
MPO Parallel Optic
0D-1Fh
Unallocated
20h
HSSDC II
21h
Copper pigtail
22h
RJ45
23h-7Fh
Unallocated
80-FFh
Vendor specific
The LC and SC connector types (jacks) are shown below.
Figure 16: Connector Types
!
!
!
Cable Types
The cabling specifications are provided for troubleshooting purposes.
RJ-45 to DB-9 Cisco Blue Serial Cable
Use this cable from the PC to the LIB-4xxx.
Table 7: RJ-45 Pinning