NetApp E Series Installation Manual

1.
Leveling feet
2. Stability foot
3. Go to Reinstall trays on page 15.
Reinstall trays
After you move the cabinet, you can reinstall the trays in their original locations.
About this task
Be sure to install the trays in their original locations.
Caution: Do not install the following trays in the top of the cabinet over your head. When fully-
populated, each of these trays weighs over 100 kg (220 lb). If installed in the top of the cabinet, the
trays create a top-heavy cabinet that can become easily unbalanced:
• DE6600 drive tray
Install the cabinet |
15

NetApp E Series Specifications

General

Form Factor	2U, 4U
Drive Types	SSD
Host Interface	SAS, iSCSI, FC, IB
RAID Levels	RAID 0, 1, 5, 6, 10
Operating System Compatibility	Windows, Linux, VMware
Management Software	SANtricity