PPP over Ethernet (or PPPoE)
Enter the PPPoE Username and Password supplied by your service provider.
PPTP
a. Enter the Server IP Address/Name
b. Enter the PPTP Account and PPTP Password.
L2TP
a. Enter the Server IP Address/Name
b. Enter the PPTP Account and PPTP Password.
Click Next when you have entered the required details.
3. If you want to change the 2.4GHz Wireless network settings, you can do so on this page. You can enable or disable the
Wireless network, select whether to broadcast your SSID or not and change the Wireless network name. Change the settings
as needed and click Next.
(If you wish to use the default settings, click Next)
4. You can change the WiFi 2.4GHz security key if you wish by using the Security Key Type drop down list and then typing in a
new security key in the Security Key field. The Security key must be at least 8 characters long. Click Next to continue.
To Next Page
Loading...
