NetComm NB16WV-02 - VoIP Service Configuration

www.netcommwireless.com
NetComm Wireless NB16WV-02 User Guide
65
VoIP Settings
Configurations
Service Domain
The Service Domain page is where you enter your VoIP service settings as supplied by your VoIP service provider (VSP). If you are
unsure about a specific setting or have not been supplied information for a particular field, please contact your VOIP service
provider to verify if this setting is needed.
OPTION
DEFINITION
Display Name
Enter the display name for your VoIP service.
User Name
Enter the User Name for your VoIP service.
Register Name
Enter the Register Name (May be called the “Auth ID”) for your VoIP service.
Register Password
Enter the Register Password (May be called the “Auth Password”) for your VoIP service.
Domain
Enter the Domain for your VoIP service.
Registrar/Proxy Server
Enter the Registrar or Proxy Server for your VoIP service.
Use Outbound Server
Enable or Disable the use of an Outbound Proxy for VOIP calls.
Outbound Proxy
Enter the Outbound Proxy server address to use.
Status
The current status of your VOIP service.
Click Save to save your settings and connect to your VoIP service or Undo to discard the settings entered.