NetComm Wireless NB16WV-02 User Guide
The interface to configure. When Mobile Broadband is selected, you may also configure whether the connection is active
or inactive.
Use the drop down list to select the type of WAN connection you want to use.
Remote Host for keep alive
A host name to use for the keep alive function. This host will be used to send a ping request in order to keep the
connection alive.
The static IP address assigned to you by your internet service provider.
The subnet mask of the IP address assigned to you by your internet service provider.
The WAN Gateway provided to you by your internet service provider.
This feature allows you to manually assign a Primary DNS Server
(Optional - Refer to your ISP for more information).
This feature allows you to manually assign a Secondary DNS Server (Optional - Refer to your ISP for more information).
This option enables or disables "Network Address Translation" for this connection type.
Allows you to select the method of multicast or disable it.
Allows you to enable or disable IGMP Snooping. IGMP Snooping configures the router to listen to IGMP conversations
between hosts and routers and maintain a map of the links that need IP multicast streams.
VLAN tagging is primarily used in virtual networks which span over multiple switches. VLAN tagging involves the router
inserting a VLAN ID into a packet header in order to identify which CLAN the packet belongs to. You may enable VLAN
tagging and specify the ID with a value between 1 and 4094.
To Next Page
Loading...
