NetComm Wireless NB16WV-02 User Guide
Port Triggering
Some applications like online games, video conferencing and Internet telephony require multiple connections to the internet. As
such, these applications cannot work with a pure NAT router such as the NB16WV-02.
The Port Triggering feature allows some of these applications to work with this router.
Note: If this fails to make the application work, try to configure that computer as the DMZ host instead.
(For further instructions on setting up a DMZ host, please refer to the “Miscellaneous” section below)
The outbound port number that will be triggered by the application..
When the trigger packet is detected, the inbound packets sent to the specified port numbers will be allowed to pass through
the firewall.
Select to enable or disable the configured special application entry.
The NB16WV-02 also provides predefined settings for some popular applications.
To use the predefined settings, select your application from the Popular applications drop down list, select an unused ID from the
list and then click Copy to. The predefined settings will then be added to the list.
Click Save to save the settings or Undo to cancel.
To Next Page
Loading...
