NetComm Wireless NB16WV-02 User Guide
Caller ID
The Caller ID page enables you to configure whether your Caller ID is sent when receiving an inbound call.
(If supported by your VOIP service)
Select to use or Disable Caller ID.
Click Save to save your settings or Undo to discard the settings entered.
Flash Time
The Flash Time page enables you to configure the minimum and maximum time a hook flash signal can occur for the NB16WV-02
to recognise it.
FXS Flash Signal Detect (MAX)
Enter the maximum time (in milliseconds) to detect a hook flash.
FXS Flash Signal Detect (MIN)
Enter the minimum time (in milliseconds) to detect a hook flash.
This setting should not need to be changed unless directed to do so.
Click Save to save your settings or Undo to discard the settings entered.
To Next Page
Loading...
