NETGEAR AC1200 JR6100

USB Storage
52
AC1200 WiFi Router JR6100
2. Click the Create Network Folder button.
If the Create a Network Folder screen does not display, your web browser might be
blocking pop-ups. If it is, then change the browser settings to allow pop-ups.
3. Click the Browse button next to the Folder field, and select the folder.
4. Fill in the Share Name field.
5. In the Read
Access list and the W
rite Access list, select the settings that you want.
The user name (account name) for All – no password is guest. The password for admin is
the same one that is used to log in to the router. By default, it is password.
6. Click the Apply button.
The folder is added on the USB device.
 To edit a network folder:
1. Select ADVANCED > ReadySHARE > Advanced Settings
.
2. Click the Edit button.
The Edit Network Folder screen displays the same settings shown in the Create a
Network Folder screen.
3. Change the settings in the fields as needed.
4. Click the Apply button.
Your changes are saved.
Specify Approved USB Devices
For more security, you can set up the router to share only approved USB devices.
 To set up approved USB devices:
1. Select ADVANCED >
Advanced Setup > USB Settings.