Advanced Settings
105
AC1200 WiFi Router JR6100
IPv6 Pass Through
In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and
WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header packets.
To set up a pass-through IPv6 Internet connection:
1. Select ADVANCED >
Advanced Setup > IPv6.
The IPv6 screen displays.
2. In the Internet Connection T
ype list, select Pass Through.
The screen adjusts, but no new fields display.
3. Click the Apply button.
IPv6 Fixed
To set up a fixed IPv6 Internet connection:
1. Select ADVANCED >
Advanced Setup > IPv6.
The IPv6 screen displays.
2. In the Internet Connection T
ype field, select Fixed.
The screen adjusts:
3. Configure the fixed IPv6 addresses for the WAN connection:
• IPv6 Address/Prefix Length
. The IPv6 address and prefix length of the router WAN
interface.
• Default IPv6 Gateway. The IPv6 address of the default IPv6 gateway
, which must be
on the router’s WAN interface.
To Next Page
Loading...
Need help?
General
