NETGEAR C6300v2 User Manual

If you want to connect your cable modem router to a router, you must disable router
mode on the cable modem router. Disable router mode so that your cable modem
router avoids conflicting with the other router on the network.
To disable router mode on your cable modem router:
1.
Launch a web browser from a computer or mobile device that is connected to the
cable modem router network.
2.
Enter http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the cable modem router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Administration > Router Mode.
The Router Mode page displays.
5.
Select the No radio button.
6.
Click the Apply button.
Your settings are saved.
7. Follow the instructions that came with your router or gateway to connect your cable
modem router to a router.
User Manual19Hardware Setup
AC1750 WiFi Cable Modem Router

NETGEAR C6300v2 Specifications

General

Brand	NETGEAR
Model	C6300v2
Device Type	Cable Modem Router
Maximum WiFi Speed	AC1750 (450 + 1300 Mbps)
Max Download Speed	680 Mbps
Ethernet Ports	4 x Gigabit Ethernet
USB Ports	1 x USB 2.0
Modem Technology	DOCSIS 3.0
Channel Bonding	16x4
WiFi Technology	802.11ac
Compatible Cable Providers	Xfinity, Spectrum, Cox
Security Features	WPA/WPA2