3.
Press the WPS button on the cable modem router.
4.
Within two minutes, on your WPS-enabled device, press its WPS button or follow
its instructions for WPS connections.
Your WPS-enabled device connects to the WiFi network.
Types of Logins
Separate types of logins serve different purposes. It is important that you understand
the difference so that you know which login to use when.
Types of logins:
•
WiFi network key or password. Your cable modem router is preset with a unique
WiFi network name (SSID) and password for WiFi access. This information is on the
cable modem router label.
Note: Your cable modem router broadcasts dual-band 2.4 GHz and 5 GHz WiFi
signals. The label shows the SSID for the 2.4 GHz signal. For information about 5
GHz WiFi settings, see Specify Basic WiFi Settings on page 65.
•
Modem router login. This logs you in to the cable modem router web pages as
admin from an Internet browser.
Log In to the Cable Modem Router
When you connect to the network (either with WiFi or with an Ethernet cable), you can
use a web browser to access the cable modem router to view or change its settings.
The first time you access the cable modem router, the cable modem router automatically
checks to see if it can connect to your Internet service.
To log in to the cable modem router:
1.
Launch a web browser from a computer or mobile device that is connected to the
cable modem router network.
2.
Type http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the cable modem router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
User Manual22Connect to the Network and
Access the Cable Modem Router
AC1750 WiFi Cable Modem Router
To Next Page
Loading...
Need help?
General
