7.
Make sure that you can log in to the cable modem router web interface after the
setup.
In a new web browser window, enter http://routerlogin.net or http://192.168.0.1
and then enter the cable modem router admin user name and password.
If the BASIC Home page displays, you are ready to activate your Internet service.
8. Activate your Internet service.
Even though an Internet connection is established, Internet service is available only
after you set it up with your cable Internet provider. For information about how to
activate your Internet service, see Activate Your Internet Service on page 17.
Activate Your Internet Service
Before you activate your Internet service, gather the following information:
•
Your cable Internet provider account information
•
Cable modem router model number, which is C6300v2
•
Cable modem router serial number, which is on the cable modem router label
•
Cable modem router MAC address, which is on the cable modem router label
Figure 5. Cable modem router label example
The following is contact information for cable Internet providers that support your cable
modem router.
Table 3. Cable Internet provider contact information
Contact InformationCable Internet
Provider
https://www.cableone.net/
1-877-MY-CABLE (1-877-692-2253)
CableOne
https://www.cox.com/activate
1-888-556-1193
Cox
https://maestro.mediacomcc.com/walledgarden/page/login.jsp
1-855-Mediacom (1-855-633-4226)
Mediacom
User Manual17Hardware Setup
AC1750 WiFi Cable Modem Router
To Next Page
Loading...
Need help?
General
