Front Panel LEDs and Buttons
You can use the LEDs to verify status and connections.
The following buttons are located on the front of the cable modem router:
Table 1. Front panel buttons
DescriptionButton
This button lets you use WPS to join the WiFi network without typing the WiFi password. The WPS
LED blinks during this process and then lights solid.
•
Solid green. Your cable modem router connected to a WPS-enabled device.
•
Blinking green. Your cable modem router is attempting to connect to a WPS-enabled device.
•
Off. A WPS connection is not in progress.
WPS
User Manual9Hardware Setup
AC1750 WiFi Cable Modem Router
To Next Page
Loading...
