Set Up Parental Controls
To set up Parental Controls, you must download the NETGEAR genie app on your mobile
device. For more information about the NETGEAR genie app, visit NETGEAR.com/genie.
After you set up and enable Parental Controls, you can change the web filtering level
for each device on the network through the network map page on the genie app.
To set up Parental Controls:
1. Connect your mobile device to your cable modem router’s WiFi network.
2. Launch the app store on your mobile device and download the NETGEAR genie
app.
3. Launch the NETGEAR genie app.
The dashboard displays.
4.
Tap Parental Controls.
The Parental Controls page displays.
5.
To log in to your OpenDNS account, tap the LOGIN button, enter your OpenDNS
user name, and tap the LOGIN button.
Parental Controls is automatically enabled.
6.
To create an OpenDNS account, tap CREATE ACCOUNT, fill in the fields, tap the
SIGN UP button.
Your account is created and Parental Controls is automatically enabled.
For more information about how to setup Parental Controls using the NETGEAR
genie app, see the genie Mobile App User Manual, which is available at
downloadcenter.netgear.com/.
Block Access to Your Network
You can use access control to block access to your network.
To set up access control:
1.
Launch a web browser from a computer or mobile device that is connected to the
cable modem router network.
2.
Enter http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the cable modem router admin user name and password.
User Manual29Control Access to the Internet
AC1750 WiFi Cable Modem Router
To Next Page
Loading...
Need help?
General
