can range from 1 to 255. The default value for the advertisement time to live is 4
hops, which is fine for most home networks. If you notice that some devices are not
being updated or reached correctly, it might be necessary to increase this value.
8.
Click the Apply button.
The UPnP Portmap Table displays the IP address of each UPnP device that is accessing
the cable modem router and which ports (internal and external) that device opened.
The UPnP Portmap Table also displays what type of port is open and whether that
port is still active for each IP address.
9.
To refresh the information in the UPnP Portmap Table, click the Refresh button.
Use the WPS Wizard for WiFi Connections
The WPS Wizard helps you add a computer or mobile device to your WiFi network
without typing the WiFi password.
To use the WPS Wizard:
1.
Launch a web browser from a computer or mobile device that is connected to the
cable modem router network.
2.
Enter http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the cable modem router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > WPS Wizard.
A page displays that explains WPS.
5.
Click the Next button.
The WPS page displays.
6.
Select the radio button for the setup method that you want to use:
•
Push button. Click the WPS button on this page.
•
PIN Number. The page adjusts. Enter the client security PIN, and click the Next
button.
7.
Within two minutes, go to the client device and use its WPS software to connect to
the WiFi network.
User Manual64Specify Network Settings
AC1750 WiFi Cable Modem Router
To Next Page
Loading...
Need help?
General
