If you turned off both WiFi radios, the WiFi On/Off LED and the WPS LED turn off. If
you turned on the WiFi radios, the WiFi On/Off LED and the WPS LED light.
Specify WPS Settings
Wi-Fi Protected Setup (WPS) lets you join the WiFi network without typing the WiFi
password.
To specify WPS settings:
1.
Launch a web browser from a computer or mobile device that is connected to the
cable modem router network.
2.
Enter http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the cable modem router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
The Gateway’s PIN field displays the fixed PIN that you can use to configure the cable
modem router’s WiFi settings from another device through WPS.
5.
(Optional) Select or clear the Disable Router’s PIN check box.
The PIN function might temporarily be disabled when the cable modem router
detects suspicious attempts to break into the cable modem router’s WiFi settings
by using the cable modem router’s PIN through WPS. You can manually enable the
PIN function by selecting the Disable Router’s PIN check box.
6.
Click the Apply button.
Your settings are saved.
Enable or Disable Router Mode
Your can enable router mode if you want to use your cable modem router as a cable
modem and router. If you want use your cable modem router as a cable modem and
connect another router, disable router mode.
User Manual70Specify Network Settings
AC1750 WiFi Cable Modem Router
To Next Page
Loading...
Need help?
General
