Specify the Cable Connection Starting
Frequency
The starting frequency is automatically generated. For most Internet connections, you
do not need to specify this information. If you must enter a starting frequency, contact
your Internet provider.
To change the starting frequency:
1.
Launch a web browser from a computer or mobile device that is connected to the
cable modem router network.
2.
Enter http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the cable modem router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select Cable Connection.
The Cable Connection page displays the status of all downstream and upstream
channels.
5.
In the Starting Frequency field, enter a frequency.
6.
Click the Apply button.
Your settings are saved.
View Modem Router Initialization
You can track the initialization procedure of the cable modem router and get details
about the downstream and upstream cable channel. The time is displayed after the
cable modem router is initialized.
The cable modem router automatically goes through the following steps in the
provisioning process:
1. Scans and locks the downstream frequency and then ranges the upstream channels.
2. Obtains a WAN address for the cable modem router.
3. Connects to the Internet.
User Manual25Specify Your Internet Settings
AC1750 WiFi Cable Modem Router
To Next Page
Loading...
Need help?
General
