3.
Use the print feature in your application to print your document.
The NETGEAR USB Control Center automatically connects your computer to the
USB printer and prints the document. If another computer is already connected to
the printer, your print job goes into a queue to wait to be printed.
4.
If your document does not print, use the NETGEAR USB Control Center to check the
printer status.
5. To release the printer so that all computers on the network can use it, click the
Disconnect button.
The status changes to Available. Now any computers on the network can use the
printer.
6.
To exit the utility, select System > Exit.
User Manual53Share a USB Printer
AC1750 WiFi Cable Modem Router
To Next Page
Loading...
