11
2
2. Wireless Configuration
Note: Before changing wireless settings, connect the gateway and set up
its Internet connection as described in the Wireless Cable Gateway
CG3000 Quick Install Guide.
This chapter includes:
• Set Up Your Wireless Network on page 12.
• Manually Configure The Wireless Settings on page 12.
• Push 'N' Connect (WPS) Wireless Setup on page 16.
• On the computer that just joined the wireless network, make sure you can connect to the
Internet. You should see the gateway’s Internet LED blink, showing that its Internet
connection is in use. on page 17..
To Next Page
Loading...
Need help?
General