Wireless Configuration
14
NETGEAR Wireless Cable Gateway CG3000
1. In the Security Options section of the Wireless Settings screen, leave the default setting
or
FINALAN0AS
select one of the WPA settings:
• WPA-PSK. This setting provides the TKIP encryption type and a pre-shared key
passphrase.
• WPA2-PSK. This setting provides the AES encryption type and a pre-shared key
passphrase.
2. Depending on the WPA settings that you select, enter the required information.
For WPA-PSK or WPA2-PSK, enter the pre-shared key, which is a passphrase between
8 and 63 characters. This product comes with a preconfigured WPA passphrase.
3. Click Apply to save your settings.
4. Configure your wireless computers with the same WPA2 or WPA settings as your gateway
so that you will be able to connect.
To Next Page
Loading...
Need help?
General