Advanced Settings
128
D6200 WiFi DSL Modem Router
8. Type the gateway IP address.
The gateway IP address has to be a WiFi DSL modem router on the same LAN segment
as
the WiFi DSL modem router.
9. T
ype a number from 1 through 15 as the metric value.
This value represents the number of WiFi DSL
modem routers between your network and
the destination. Usually, a setting of 2 or 3 works, but if this connection is a direct
connection, set it to 1.
10. Click Apply.
The route is made effective.
To Next Page
Loading...
