NETGEAR DM200 User Manual

1
Hardware Overview of the Modem
The NETGEAR
®
Broadband High-Speed DSL Modem Model DM200, in this manual referred to as the modem,
supports autodetection for universal DSL support. The modem is compatible with most major broadband DSL
Internet service providers and supports VDSL2 and ADSL2+.You can connect the modem directly to a computer,
router, or WiFi router.
The chapter contains the following sections:
• Unpack Your Modem on page 7
• Front Panel With LEDs on page 7
• Back Panel With Ports, Buttons, and a DC Connector on page 9
• Product Label on page 10
The modem does not support a connection to a cable Internet service provider.The modem
supports only a connection to a DSL (ADSL or VDSL) Internet service provider. However,
the modem does not support a bonded VDSL connection.
Note
For more information about the topics that are covered in this manual, visit the support website
at support.netgear.com.
Note
Firmware updates with new features and bug fixes are made available from time to time at
downloadcenter.netgear.com.You can check for and download new firmware manually. If
the features or behavior of your product does not match what is described in this guide, you
might need to update your firmware.
Note
6

NETGEAR DM200 Specifications

General

DC-in jack	Yes
Ethernet LAN (RJ-45) ports	1
WAN connection	ADSL (RJ-11)
Cables included	LAN (RJ-45), Phone (RJ-11)
Compatible operating systems	Microsoft Windows 7, 8, 10, Vista, XP, 2000, Mac OS, UNIX, Linux

Weight and Dimensions

Weight	163 g
Dimensions (WxDxH)	132.46 x 108.7 x 48 mm