Factory Settings
You can reset the modem to the factory default settings, which are shown in the following table.
For more information about resetting the modem to its factory settings, see Return the Modem to Its Factory
Default Settings on page 76.
Table 3. DM200 modem factory default settings
Default SettingFeature
Router login
www.routerlogin.net (or www.routerlogin.com or 192.168.5.1)User login URL
adminUser name (case-sensitive)
passwordLogin password
(case-sensitive)
Router (Modem + Router)
For more information, see Disable the Modem’s Routing Features and Use the
Modem as a DSL Modem Only on page 69.
Device mode
Internet connection
Use default hardware addressWAN MAC address
Determined by the protocol that is used for the Internet connection
For more information, see Manage the MTU Size on page 52.
WAN MTU size
AutosensingPort speed
Local network (LAN)
192.168.5.1LAN IP address
255.255.255.0Subnet mask
EnabledDHCP server
192.168.5.2 to 192.168.5.254DHCP range
192.168.5.2DHCP starting IP address
192.168.5.254DHCP ending IP address
Supplemental Information
105
Broadband High-Speed DSL Modem Model DM200
To Next Page
Loading...
