NETGEAR GS724TPv2

Configure System Information
41
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Time > Time Configuration > SNTP Global Status.
When you select the SNTP option as the clock source, the SNTP Global Status is
displayed below the SNTP Global Configuration section.
6. Click the Update button to update the page with the latest information about the switch.
The following table displays the nonconfigurable information on the page.
Table 5. SNTP Global Status information
Field Description
Version The SNTP version that the client supports.
Supported mode The SNTP modes that the client supports. Multiple modes can be supported by
a client.
Last Update Time The local date and time (UTC) that the SNTP client last updated the system
clock.
Last Attempt Time The local date and time (UTC) of the last SNTP request or receipt of an
unsolicited message.