NETGEAR GS748T - ProSafe Smart Switch User Manual

GS748T Smart Switch Hardware Installation Guide
1-4 Introduction
1.1, September 2007
Package Contents
Figure 1-2 shows the package contents of the NETGEAR GS748T Gigabit Smart Switch.
Verify that your package contains the following:
• GS748T Gigabit Smart Switch
• Rubber footpads for tabletop installation
• Power cord
• 19-inch rack-mount kit
• Installation guide
• Smart Switch Resource CD with Smart Wizard Discovery Utility, and Hardware and User’s
manuals
• Warranty/Support Information Card
If any item is missing or damaged, contact your point-of-purchase representative immedi-
ately.
Figure 1-2

NETGEAR GS748T - ProSafe Smart Switch Specifications

General

Model	GS748T
Device Type	Smart Switch
SFP Slots	4
Form Factor	Rack-mountable
Switching Capacity	96 Gbps
MAC Address Table Size	8K entries
VLAN Support	Yes
QoS	Yes
Humidity	10% to 90% non-condensing
RAM	128 MB
Flash Memory	32 MB
Power Device	Internal power supply
Ports	48 x 10/100/1000
Management	Web-based
Operating Temperature	0 - 50 °C
Voltage Required	100-240 VAC
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Features	VLAN support, QoS, port mirroring, SNMP