Smart Switch Software User Manual GS748T
Using the Smartwizard Discovery Utility 2-5
v1.0, October 2007
Smartwizard Utilities
Alternatively, from the Smartwizard main page of Figure 2-1 you can access the following
features:
• Password Change
• Firmware Upgrade
Password Change
You can set a new password of up to 20 ASCII characters.
1. On the Smartwizard Utility screen, click Password Change. The Password Change screen.
appears. You can set a new password. In this process, you are required to enter the old
password and to confirm the new one.
2. Click Set to enable the new password.
Firmware Upgrade
The application software for the GS748T switch is upgradeable, enabling your switch to take
advantage of improvements and additional features as they become available. The upgrade
procedure and the required equipment are described as follows. This procedure assumes that you
Figure 2-5
To Next Page
Loading...
