EasyManuals Logo

NETGEAR LBR20 User Manual

NETGEAR LBR20
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #155 background imageLoading...
Page #155 background image
If you do not receive replies, check the following:
Check to see that the IP address of your router is listed as the default gateway for
your computer. If DHCP assigns the IP configuration of your computers, this
information is not visible in your computer Network Control Panel. Verify that the IP
address of the router is listed as the default gateway.
Check to see that the network address of your computer (the portion of the IP address
specified by the subnet mask) is different from the network address of the remote
device.
Check to see that your cable or DSL modem is connected and functioning.
If your ISP assigned a host name to your computer, enter that host name as the
account name on the Internet Setup page.
Your ISP might be rejecting the Ethernet MAC addresses of all but one of your
computers.
Many broadband ISPs restrict access by allowing traffic only from the MAC address of
your broadband modem. Some ISPs additionally restrict access to the MAC address of
a single computer connected to that modem. If your ISP does this, configure your router
to “clone” or “spoof” the MAC address from the authorized computer.
User Manual155Troubleshooting
4G LTE WiFi Orbi Router Model LBR20

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR LBR20 and is the answer not in the manual?

NETGEAR LBR20 Specifications

General IconGeneral
ModelLBR20
CategoryWireless Router
WiFi Technology802.11ac
Maximum Data Transfer Rate2200 Mbps
Number of Ethernet Ports2
Ethernet Port TypeGigabit Ethernet
Mobile Network4G LTE
AntennaInternal
Frequency Band2.4 GHz, 5 GHz
Security FeaturesWPA2-PSK
WiFi PerformanceAC2200
WiFi SpeedAC2200

Related product manuals