NETGEAR LBR20 User Manual

Orbi router LED behavior
The Orbi router has a Power LED on the back and a Ring LED on the top. For information
about the precise locations of the LEDs, see the installation guide, which you can
download by visiting netgear.com/support/download.
The following table describes the LED behavior.
Table 1. LED behavior Orbi router
DescriptionLED color
Power LED
Power is on.Solid green
The router is booting.Solid amber
The router’s firmware is resetting to its factory default settings.Blinking amber
The router’s firmware is corrupted.Blinking red
Power is not suppliedOff
Ring LED
The router is booting or someone pressed the Sync button.Pulsing white
The router is resetting to its factory default settings.Solid white
The router cannot connect to the Internet.Solid magenta
The router finished booting and is working normally.Off
User Manual9Overview
4G LTE WiFi Orbi Router Model LBR20

NETGEAR LBR20 Specifications

General

Model	LBR20
Category	Wireless Router
WiFi Technology	802.11ac
Maximum Data Transfer Rate	2200 Mbps
Number of Ethernet Ports	2
Ethernet Port Type	Gigabit Ethernet
Mobile Network	4G LTE
Antenna	Internal
Frequency Band	2.4 GHz, 5 GHz
Security Features	WPA2-PSK
WiFi Performance	AC2200
WiFi Speed	AC2200