The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
5.
Select ADVANCED > Advanced Setup > Router / AP Mode.
The Router / AP Mode page displays.
6. Select the AP Mode radio button.
The page adjusts.
7. Select the IP address setting:
•
Get dynamically from existing router. The other router on the network assigns
an IP address to this router while this router is in AP mode.
•
Use fixed IP address (not recommended). Use this setting if you want to
manually assign a specific IP address to this router while it is in AP mode. Using
this option effectively requires advanced network experience.
Note: To prevent WiFi interference with other routers or gateways in your network,
we recommend that you use different WiFi settings on each router or gateway. You
can also turn off the WiFi radio on the other router or gateway and use only the Orbi
router for WiFi client access.
8. Click the Apply button.
The IP address of the router changes, and you are disconnected.
9. To reconnect, close and restart your browser and enter orbilogin.com.
Set up router mode
If you set up your router to function as an access point only (see Use the router as a WiFi
access point only on page 86), you can change it back to function as a router, which is
the default function.
To set up the Orbi router as a router:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
User Manual87Specify Network Settings
4G LTE WiFi Orbi Router Model LBR20
To Next Page
Loading...
Need help?
General
