For more information, see Set up router mode on page 87.
5.
Update your router’s firmware.
For more information, see Check for firmware updates on page 92 or Manually
update the router firmware on page 93.
6. Select BASIC > Parental Controls.
The Parental Controls page displays.
7. Move the Smart Parental Controls slider to the right to enable Circle.
The slider shows Enabled. The links to download the Circle app displays.
8. Click the Apply button.
Your settings are saved.
9. Download the Circle app on your mobile device.
10.
Launch the Circle app and follow to prompts to set up Circle.
Circle smart parental controls is enabled on your NETGEAR router.
Enable Circle smart parental controls using the Orbi app
Before enabling Circle, make sure that your Orbi router is in router mode (which is the
default mode). Your router must be in router mode to work with Circle. You can’t enable
Circle if your router is in access point (AP) mode or bridge mode.
To enable Circle smart parental controls using the Orbi app:
1. Launch the Orbi app.
The dashboard displays.
2. Tap Parental Controls.
The Parental Control page displays.
3. Move the Enable Circle slider to the right to enable Circle.
4. Tap the Download and Install Circle App button.
5. Download the Circle app.
You must use the Circle app to finish setting up your Circle account.
6.
Launch the Circle app and follow the prompts.
User Manual51Control Access to the Internet
4G LTE WiFi Orbi Router Model LBR20
To Next Page
Loading...
Need help?
General
