Manually update the router firmware
You can download and manually update the firmware on your router. If a satellite is
connected to your router, you can log in to the router to manually upload the firmware
on your satellite. For more information, see Manually update satellite firmware on page
134.
WARNING: If a satellite is connected to your router, always update the firmware on
your satellite first, and then update your router. Also, do not update the firmware on
your router and satellite at the same time, and do not update more than one Orbi device
(router or satellite) at a time. If you need to update more than one Orbi device, wait for
the first Orbi device to finish updating before updating your next Orbi device.
To manually update your router’s firmware:
1.
Visit netgear.com/support and download the firmware for your Orbi router.
2.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
3. Enter orbilogin.com.
A login window opens.
4. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
5. Select ADVANCED > Administration > Firmware Update > Manual Update.
The Firmware Update page displays.
6. Click the Browse button.
7.
Locate and select the router firmware file you downloaded.
The firmware file name ends in .img or .chk.
8. Click the Upload button.
The firmware is updated.
User Manual93Manage Your Network
4G LTE WiFi Orbi Router Model LBR20
To Next Page
Loading...
Need help?
General
