•
LTE module support. The geographical area that the router’s LTE module
supports.
•
ICCID. The Integrated Circuit Card Identifier (ICCID). This is the serial number of
the SIM card.
6. To release (stop) the mobile broadband Internet connection, click the Release
button.
7. To renew the mobile broadband Internet connection, click the Renew button.
8. To exit the page, click the Close Window button.
Check the wired Internet connection status
To check the wired Internet connection status:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Click the ADVANCED tab.
5. In the Internet Port pane, click the Connection Status button.
The Mobile Information pop-up window opens.
6. Scroll down to the Connection Status section.
The table in the Connection Status section displays the following information:
•
IP Address. The IP address that is assigned to the router.
•
Subnet Mask. The subnet mask that is assigned to the router.
•
Default Gateway. The IP address for the default gateway that the router
communicates with.
•
DHCP Server. The IP address for the Dynamic Host Configuration Protocol server
that provides the TCP/IP configuration for all the computers that are connected
to the router.
User Manual100Manage Your Network
4G LTE WiFi Orbi Router Model LBR20
To Next Page
Loading...
Need help?
General
