The table displays the following information:
•
Connection Type. The connection type, such as DHCP.
•
Received Signal Quality (in dbm). The quality of the received radio signal.
•
Network mode. The broadband network mode, such as LTE.
•
Band. The LTE frequency operating band.
•
LAC. The location area code of the cellular network.
•
Cell ID. The ID of the network cell, that is, the cellular tower, to which the router
is connected.
•
SIM Status. Shows whether the SIM card is inserted in the router, and if so,
whether the SIM card is ready for operation.
•
IMEI. The International Mobile Station Equipment Identity (IMEI), used to identify
the device (that is, the router) on the network
•
IMSI. The International Mobile Subscriber Identity (IMSI), used to identify the
subscriber account (that is, the SIM card) on the network.
•
System Up Time. The time elapsed since the router was last restarted.
•
Roaming State. Shows whether the router is in its home area or is roaming.
•
Connection Status. Shows whether the router is connected.
•
IP Address. The IP address that is assigned by the LTE provider.
•
Operator. The LTE provider.
•
DNS Server. The IP address of the LTE provider’s Domain Name Service server
that provides translation of network names to IP addresses.
•
RSRP. The Reference Signals Received Power.
•
RSRQ. The Reference Signal Received Quality.
•
Signal Strength. An icon that displays the strength of the signal. One bar is a
weak signal. Five bars is a very strong signal.
•
Network Type. The LTE network type.
•
E/U/ARFCN. The E-UTRA Absolute Radio Frequency Channel Number.
•
Band Name. By default, the band name is BRS/EBS.
•
Uplink Frequency (phone to base station). The uplink frequency band in the
LTE band.
•
Downlink Frequency (base station to phone). The downlink frequency band
in the LTE band.
•
Band Number. The LTE band number.
User Manual99Manage Your Network
4G LTE WiFi Orbi Router Model LBR20
To Next Page
Loading...
Need help?
General
