•
3G. The router uses the 3G band only and does not connect to the 4G band.
By default, the selection from the menu is Automatic (4G or 3G).
6. Click the Apply button.
Your settings are saved.
Configure the mobile broadband PDP,
authentication method, and credentials
Whether you need to configure the mobile broadband packet data protocol (PDP),
authentication method, and credentials depends on the mobile broadband network
requirements of your LTE provider.
IMPORTANT: For these settings, follow the directions of your LTE provider.
To configure the mobile broadband PDP, authentication method, and credentials:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > Internet Setup > Mobile Broadband Settings.
The Mobile Broadband Settings page displays.
5.
If the LTE provider requires credentials for the router to connect to the mobile
broadband network, enter the user name and password:
•
User Name. The user name that your LTE provider gave you.
•
Password. The password that your LTE provider gave you.
If you do not know the user name and password for the mobile broadband
connection, contact your LTE provider.
User Manual25Manage the Mobile Broadband
Connection
4G LTE WiFi Orbi Router Model LBR20
To Next Page
Loading...
Need help?
General
