NETGEAR M4350 Series User Manual

•
APS600Wv2: +56 VDC, 11A DC output
•
APS920W: +54.5VDC, 16.88A DC output
•
APS2000W: +54.5 VDC, 18.35A @ 90–136 VAC DC output; +54.5 VDC, 29.36A @
180–220 VAC DC output; +54.5 VDC, 36.7A @ 220–264 VAC DC output
For information about purchasing an optional APS, contact NETGEAR or your local
NETGEAR reseller.
The following table describes the available APSs and the possible configurations
Table 12. Supported APSs
N+1 Power
Redundancy
Supported
Possible APS
Configurations
PSU BaysInternal
PSU
PoE
Supported
Switch Model
No--None240WNoM4350-8X8F
No--None240WNoM4350-12X12F
Yes1x APS350W or
1x APS600Wv2 or
1x APS920W
1780WYesM4350-24G4XF
Yes1x or 2x APS350W
1x or 2x APS600Wv2
1x or 2x APS920W
1x or 2x APS2000W
or any combination of
these APSs.
2400WYesM4350-48G4XF
Yes1x APS350W or
1x APS600Wv2
2
1780WYesM4350-24X4V
Yes1x APS350W
3
1240WNoM4350-24F4V
Yes1x or 2x APS350W
1x or 2x APS600Wv2
1x or 2x APS920W
1x or 2x APS2000W
or any combination of
these APSs.
2400WYesM4350-44M4X4V
1. If you install a more powerful APS (an APS2000W), the PoE budget does not increase.
2. If you install a more powerful APS such as an APS920W or APS2000W, the PoE budget does not increase.
3. Although you can install a more powerful APS, you can use the APS only for redundancy.
Hardware Installation Guide43Hardware Overview
Fully Managed Switches M4350 Series

NETGEAR M4350 Series Specifications

General

Brand	NETGEAR
Model	M4350 Series
Category	Switch
Language	English