NETGEAR M5300 Series User Manual

Hardware Installation
21
NETGEAR Managed Stackable Switch M5300 Series
After you connect a console to the switch, you will need to configure it. The following
documents are provided for this purpose:
• Installation guide: Explains basic setup and configuration (provided as both a print
document and in PDF format on the resource CD).
• Command line manual: Gives detailed examples of how to use the CLI.
• Software administration guide: Describes configuration tasks.

NETGEAR M5300 Series Specifications

General

Model	M5300 Series
Stackable	Yes
Form Factor	Rack-mountable
Layer	Layer 2/3
Power over Ethernet (PoE)	Available on some models
VLAN Support	Yes
Jumbo Frame Support	Yes
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 70°C