NETGEAR Nighthawk Pro XR1000

Table 3. Router factory default settings (Continued)
Default SettingFeature
EnabledWiFi communicationGeneral WiFi
settings
EnabledSmart Connect
Enabled20/40 MHz Coexistence
See router labelSSID name
EnabledBroadcast SSID
WPA2-PSK (AES)Security
2.4 GHz: Auto
5 GHz for products for world wide use: Channel 44
5 GHz for products for use in North America: Channel
153
RF channel
2.4 GHz: Up to 600 Mbps
5 GHz: Up to 4800 Mbps
Operating mode
2346Fragmentation Length
2347CTS/RTS threshold
Long PreamblePreamble mode
100%Transmit power control
DisabledWiFi communicationGuest WiFi
network
EnabledBroadcast SSID
2.4 GHz band: NETGEAR-Guest
5 GHz band: NETGEAR-5G-Guest
SSID name
None (open network)Security
DisabledAllow guests to see each other
and access the local network
EnabledWPS capabilityWPS
Disabled while Smart Connect is enabledRouter’s WPS PIN
DisabledKeep Existing Wireless Settings
User Manual231Supplemental Information
Nighthawk Pro Gaming Router Model XR1000