NETGEAR Nighthawk Pro XR1000 User Manual

c.
Select System Information.
The page that displays shows multiple panes.
The firmware version is listed in the System Info pane.
Change the admin Password
The first time that you logged in to the router with the user name admin, you were
required to change the password. You can change this password again. This password
is not the one that you use for WiFi access.
Note: Be sure to change the password to a secure password. The ideal password
contains no dictionary words from any language and contains uppercase and lowercase
letters, numbers, and symbols. It can be up to 30 characters.
To change the admin password:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The Dashboard displays.
4. Select Settings > Administration > Set Password.
The Set Password page displays.
5.
Type the old password in the Old Password field.
This is the password that you specified the first time that you logged in to the router.
6.
Type the new password in the Set Password and Repeat New Password fields.
7. Click the Apply button.
Your settings are saved.
User Manual154Maintain the Router
Nighthawk Pro Gaming Router Model XR1000

NETGEAR Nighthawk Pro XR1000 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
Processor	1.5GHz triple-core processor
Antenna	4 external antennas
USB Ports	1 x USB 3.0 port
RAM	512MB
Flash Memory	256MB
MU-MIMO	Yes
QoS	Dynamic QoS
WiFi Speed	AX5400 (5.4 Gbps)
Ethernet Ports	4 LAN @ 1G Mbps
Frequency Band	Dual-Band (2.4GHz + 5GHz)
Security	WPA3, VPN support