If the rule is disabled, the button displays white. If the rule is enabled, the button
displays red.
The new action takes effect immediately.
Enable or Disable all Traffic Rules
When you add a traffic rule, the rule is enabled automatically. With one click of a button,
you can disable all rules and you can enable them again.
To enable or disable all traffic rules:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The Dashboard displays.
4.
Select Traffic Controller.
5.
In the Traffic Rules pane, above the table, at the upper right, enable or disable all
rules by clicking the Disable All Rules button.
When all rules are disabled, the Disable All Rules button displays white. When all
rules are enabled, the Disable All Rules button displays red.
The new action takes effect immediately.
Enable or Disable Tracking for a Traffic Rule
When you add a traffic rule, you must decide whether event tracking is enabled (by
default it is). After you add the rule, you can change the tracking settings.
To enable or disable tracking for a traffic rule:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
User Manual98Control Access to and From the
Internet
Nighthawk Pro Gaming Router Model XR1000
To Next Page
Loading...
Need help?
General
